Part Number Hot Search : 
C6204D32 X013B19 BD121 2SC46 04T4G 600ETTT 8810QJ A2010
Product Description
Full Text Search
 

To Download MASWSS0091-DIE Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications
Features
* * * * * * Supplied as Known Good Die Dual/tri/quad-band GSM/GPRS/EDGE Low Voltage: 2.5V Operation Low Harmonics: -72 dBc at +35 dBm & 1 GHz Low Insertion Loss: 0.5 dB at 1 GHz High Tx-Rx Isolation: 38 dB at 2 GHz
MASWSS0091 V6
Die Layout
Tx1 VTx1 ANT VTx2 Tx2
Description
M/A-COM's MASWSS0091 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch die. The MASWSS0091 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. The MASWSS0091 is designed for dual-, tri-, and quad-band GSM and DCS/PCS handset systems that connect separate transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 GHz requiring high power at low control voltage. The MASWSS0091 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability.
ANT
VRx1
Rx1
GND
Rx2
VRx2
VRxC
VRx3
Rx3
GND
Rx4
VRx4
Pad Layout
PAD Name
Tx1 VTx1 ANT VTx2 Tx2 VRx4 Rx4
Description
Tx1 Port Tx1 Control Antenna Port Tx2 Control Tx2 Port Rx4 Control Rx4 Port Ground Rx3 Port Rx3 Control Rx Common Control Rx2 Control Rx2 Port Ground Rx1 Port Rx1 Control Redundant ANT Pad
Ordering Information
Part Number
MASWSS0091SMB MASWSS0091-DIE Note: Die quantity varies.
Package
Sample Test Board Separated die on Grip Ring
GND Rx3 VRx3 VRxC VRx2 Rx2
Absolute Maximum Ratings 1
Parameter
Input Power (0.5 - 2.5 GHz, 2.5V Control) Voltage Operating Temperature Storage Temperature
GND Rx1
Absolute Maximum
+38 dBm 8.5 volts -40C to +85C -65C to +150C
VRx1 ANT
1. Exceeding any one or combination of these limits may cause permanent damage to the device.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications
Electrical Specifications: TA = 25C, Vc = 0V/2.5V, Z0 = 50 Ohms 2
Parameter
Tx Insertion Loss3 Rx Insertion Loss3 Tx to Rx Isolation Tx to Tx Isolation Return Loss Tx P0.1dB Rx P1dB 2nd Harmonic 3rd Harmonic Trise, Tfall Ton, Toff Transients Control Current
MASWSS0091 V6
Test Conditions
0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 2.5 GHz 1 GHz 1 GHz 1 GHz, PIN = +35 dBm, 100% Duty Cycle 1 GHz, PIN = +35 dBm, 100% Duty Cycle 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF In Band --
Units
dB dB dB dB dB dB dB dB dB dBm dBm dBc dBc S S mV A
Min.
-- -- -- -- 40 -- 22 -- -- -- -- -- -- -- -- -- --
Typ.
0.5 0.65 1.0 1.3 45 38 26 17 20 41 25 -78 -72 0.2 0.2 70 20
Max.
0.7 0.9 1.2 1.6 -- -- -- -- -- -- -- -67 -67 -- -- -- 80
2. External DC blocking capacitors are required on all RF ports. 3. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 0.5 GHz - 2.0 GHz.
Functional Schematic
100pF 100pF 100pF
Qualification
Qualified to M/A-COM specification REL-201, Process Flow -2.
Tx1
VTx1
ANT
VTx2
Tx2
Handling Procedures
Please observe the following precautions to avoid damage:
Static Sensitivity
VRxC
VRx1
VRx2
VRx3
VRx4
Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Rx1
GND
Rx2
Rx3
GND
Rx4
100pF
100pF
100pF
100pF
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications
Typical Performance Curves
TX Insertion Loss
+25C 1.0 0.8 0.6 0.4 0.2 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 +85C -40C
2.0 1.6 1.2 0.8 0.4 0.0 0.0
MASWSS0091 V6
RX Insertion Loss
+25C +85C -40C
Insertion Loss (dB)
Insertion Loss (dB)
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
TX - RX Isolation
+25C 60 +85C -40C
2nd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle
+25C -60 +85C -40C
Relative Harmonic (dBc)
55
-65 -70 -75 -80 -85 -90
Isolation (dB)
50 45 40 35 30 0.0
0.5
1.0
1.5
2.0
2.5
3.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Frequency (GHz)
Vctrl (V)
3rd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle
+25C +85C -40C
Relative Harmonic (dBc)
-60 -65 -70 -75 -80 -85 -90 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Vctrl (V)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications
Truth Table 4,5
VTx1 VTx2 VRxC VRx1 VRx2 VRx3 VRx4
1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1
MASWSS0091 V6
ANT-Tx1
On Off Off Off Off Off
ANT-Tx2 ANT-Rx1 ANT-Rx2 ANT-Rx3 ANT-Rx4
Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On
4. Differential voltage, V (state 1) -V (state 0), must be 2.5 V minimum. 5. State 0 = 0 V to +0.2 V, State 1 = 2.5 V to 5 V.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.


▲Up To Search▲   

 
Price & Availability of MASWSS0091-DIE

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X